Arquivo de Servos - Site rc4all https://rc4all.pt/categoria/radios-e-servos/servos/ Traxxas, Absima, Carson entre outras marcas Thu, 26 Sep 2024 10:25:39 +0000 pt-PT hourly 1 https://wordpress.org/?v=6.4.8 https://rc4all.pt/wp-content/uploads/2019/03/rc4all_logo.svg Arquivo de Servos - Site rc4all https://rc4all.pt/categoria/radios-e-servos/servos/ 32 32 PowerHD 1900MG Analog Servo 1.5KG/0.08sec@6.0V https://rc4all.pt/produto/powerhd-1900mg-analog-servo-1-5kg-0-08sec6-0v/ https://rc4all.pt/produto/powerhd-1900mg-analog-servo-1-5kg-0-08sec6-0v/#respond Mon, 09 Sep 2024 13:12:00 +0000 https://rc4all.pt/?post_type=product&p=31181 Informações sobre o produto “Servo analógico PowerHD 1900MG 1.5KG/0.08sec@6.0V” Binário (4,8V): 1,2 kg-cm (16,6 oz/in) Binário (6,0 V): 1,5 kg-cm (20,8 oz/in) Velocidade: 0,11 seg. (4,8V) ¦ 0,08 seg. (6,0V) Tensão de funcionamento: 4,8 ~ 6,0 Volts DC Peso: 14,0 g (0,49 oz) Tipo de rolamento: não Tipo de motor: Motor DC Tipo de engrenagem: […]

O conteúdo PowerHD 1900MG Analog Servo 1.5KG/0.08sec@6.0V aparece primeiro em Site rc4all.

]]> Informações sobre o produto “Servo analógico PowerHD 1900MG 1.5KG/0.08sec@6.0V”
Binário (4,8V): 1,2 kg-cm (16,6 oz/in)
Binário (6,0 V): 1,5 kg-cm (20,8 oz/in)
Velocidade: 0,11 seg. (4,8V) ¦ 0,08 seg. (6,0V)
Tensão de funcionamento: 4,8 ~ 6,0 Volts DC
Peso: 14,0 g (0,49 oz)
Tipo de rolamento: não
Tipo de motor: Motor DC
Tipo de engrenagem: Cobre
Temperatura de funcionamento: -20~60°C
Frequência de trabalho: 1520µs / 50hz
Tamanho: 23,0 x 12,2 x 27,5 mm (0,91 x 0,48 x 1,08 pol.)

O conteúdo PowerHD 1900MG Analog Servo 1.5KG/0.08sec@6.0V aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/powerhd-1900mg-analog-servo-1-5kg-0-08sec6-0v/feed/ 0 Interface USB Adapter https://rc4all.pt/produto/interface-usb-adapter/ https://rc4all.pt/produto/interface-usb-adapter/#respond Thu, 08 Feb 2024 11:47:15 +0000 https://rc4all.pt/?post_type=product&p=29846 Interface USB Adapter Interface USB Adapter 2030110 This USB adapter is only applicable for ABSIMA programmable servos marked with SMART SERVO. suitable for the following programmable Absima servos: ST23DBF Team Spec. ST50DBT Team Spec. LP16DBF Team Spec. LP20DBT Team Spec. ST18DBF Race Spec. ST40DBT Race Spec. LP15DBF Race Spec. LP19DBT Race Spec. LP34DBT Crawler Spec. […]

O conteúdo Interface USB Adapter aparece primeiro em Site rc4all.

]]> Interface USB Adapter

Interface USB Adapter
2030110

This USB adapter is only applicable for ABSIMA programmable servos marked with SMART SERVO.
suitable for the following programmable Absima servos:

ST23DBF Team Spec.

ST50DBT Team Spec.

LP16DBF Team Spec.

LP20DBT Team Spec.

ST18DBF Race Spec.

ST40DBT Race Spec.

LP15DBF Race Spec.

LP19DBT Race Spec.

LP34DBT Crawler Spec.

System Requirements
1. operating voltage: USB(5V/500mA).
2. operating system: Windows XP/Windows Vista/Windows 7/Windows 8/Windows10 ( 32/64bit).
3. application: ABSIMA programmable servos with “SMART SERVO” marking.
THE NECCESSARY SOFTWARE CAN BE FOUND HERE ABOVE IN THE “DOWNLOAD” TAB
2030110_02.jpg
Parameter Einstellungen:
1. Servo-Angle: set the servo rotation angle.
2. Servo-Neutral: Adjust the servo neutral position Note: If the transmitter rotates to the neutral position and the servo does not
    stay in the appropriate position, you can change this value to adjust the servo horn. This is equivalent to trimming the
    transmitter channel.
3. PWM Power: Set the servo output power. The higher the output power, the higher the servo torque and the speed, but also
    the power consumption is higher.
4. Damping factor: Set the damping of the servo.
5. Sensitivity: Set the deadband (sensitivity) of the servo.
6. Soft Start: Slow recovery when the servo is turned on. As soon as the servo is switched on, it will rotate smoothly to the
    position of the current input signal. Note: This function is used to prevent damage caused by incorrect mounting of the servo
    when switching on.
7. Inversion: Setting of normal and reverse rotation of the servo.
8. Narrow Band: FUTABA SR-Modus
9. SANWA SSR: SANWA SSR-Modus. Note: Enable this function to support the SANWA SSR high speed mode. The servo
    angle may not be accurate, it needs to be readjusted.
10. Lose PPM Protection: Signal loss protection, there are three functions to choose from:
      a. Release: Non-Protection
b. Maintain position: Remains in the position before the signal loss
c. Neutral position: Back to neutral position (1500uS position)
11. Overload protection: Set the servo blocking protection. There are three levels, which are activated by ticking:
Stage 1: Set the start time and power value of the primary protection.
Stage 2: Setting the start time and power value of the secondary protection.
Stage 3: Setting the start time and the power of the tertiary protection.
Note: The left side is used to set the protection start-up time, the right side is used to set the output power after the start-up
      protection is activated.
12. Servo-Informationen: Servo-informationen. including servo model, version date and firmware-name.
Servo Name: Servo-Model
Manufacture: Date of servo version
Firmware: Servo firmware name

O conteúdo Interface USB Adapter aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/interface-usb-adapter/feed/ 0 Servo HV Digital Full-Alu LP16DBF 16KG Team-Spec. https://rc4all.pt/produto/servo-hv-digital-full-alu-lp16dbf-16kg-team-spec/ https://rc4all.pt/produto/servo-hv-digital-full-alu-lp16dbf-16kg-team-spec/#respond Thu, 08 Feb 2024 11:40:48 +0000 https://rc4all.pt/?post_type=product&p=29842 Servo HV Digital Full-Alu LP16DBF 16KG Team-Spec. Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle […]

O conteúdo Servo HV Digital Full-Alu LP16DBF 16KG Team-Spec. aparece primeiro em Site rc4all.

]]> Servo HV Digital Full-Alu LP16DBF 16KG Team-Spec.
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.

Our “Team Spec.” servos are mainly used in competition vehicles and offer a whole range of excellent features:
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Speed / Low Profile
Operating Voltage: 4.8 – 8.4V HV
Torque / Speed @ 4.8V: 10.0kg / 0.078sec/60°
Torque / Speed @ 6.0V: 13.0kg / 0.068sec/60°
Torque / Speed @ 7.4V: 14.5kg / 0.062sec/60°
Torque / Speed @ 8.4V: 16.0kg / 0.056sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6
Waterproof Rating: IP65 water-resistant
Bearing: Metal ball bearings (2)
Size: 40.8*20.2*26.5 mm
Weight: 61,0 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
Not sure if these specifications are right for you? Here is an overview with even more information on all TEAM SPEC. SERVOS to compare:

O conteúdo Servo HV Digital Full-Alu LP16DBF 16KG Team-Spec. aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/servo-hv-digital-full-alu-lp16dbf-16kg-team-spec/feed/ 0 Servo HV Digital Full-Alu LP20DBT 20KG Team-Spec. https://rc4all.pt/produto/hv-digital-full-alu-servo-lp20dbt-20kg-team-spec/ https://rc4all.pt/produto/hv-digital-full-alu-servo-lp20dbt-20kg-team-spec/#respond Thu, 08 Feb 2024 11:25:42 +0000 https://rc4all.pt/?post_type=product&p=29838 Servo HV Digital Full-Alu LP20DBT 20KG Team-Spec. Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle […]

O conteúdo Servo HV Digital Full-Alu LP20DBT 20KG Team-Spec. aparece primeiro em Site rc4all.

]]> Servo HV Digital Full-Alu LP20DBT 20KG Team-Spec.
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.

Our “Team Spec.” servos are mainly used in competition vehicles and offer a whole range of excellent features:
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Speed / Low Profile
Operating Voltage: 4.8 – 8.4V HV
Torque / Speed @ 4.8V: 14.0kg / 0.100sec/60°
Torque / Speed @ 6.0V: 17.0kg / 0.085sec/60°
Torque / Speed @ 7.4V: 19.5kg / 0.078sec/60°
Torque / Speed @ 8.4V: 20.0kg / 0.068sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6
Waterproof Rating: IP65 water-resistant
Bearing: Metal ball bearings (2)
Size: 40.8*20.2*26.5 mm
Weight: 61,0 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
Not sure if these specifications are right for you? Here is an overview with even more information on all TEAM SPEC. SERVOS to compare:

O conteúdo Servo HV Digital Full-Alu LP20DBT 20KG Team-Spec. aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/hv-digital-full-alu-servo-lp20dbt-20kg-team-spec/feed/ 0 Servo HV Digital Full-Alu ST23DBF 23KG Team-Spec. https://rc4all.pt/produto/servo-hv-digital-full-alu-st23dbf-23kg-team-spec/ https://rc4all.pt/produto/servo-hv-digital-full-alu-st23dbf-23kg-team-spec/#respond Thu, 08 Feb 2024 11:18:16 +0000 https://rc4all.pt/?post_type=product&p=29834 Servo HV Digital Full-Alu ST23DBF 23KG Team-Spec. Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle […]

O conteúdo Servo HV Digital Full-Alu ST23DBF 23KG Team-Spec. aparece primeiro em Site rc4all.

]]> Servo HV Digital Full-Alu ST23DBF 23KG Team-Spec.
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.

Our “Team Spec.” servos are mainly used in competition vehicles and offer a whole range of excellent features:
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Speed
Operating Voltage: 4.8 – 8.4V HV
Torque / Speed @ 4.8V: 12.0kg / 0.078sec/60°
Torque / Speed @ 6.0V: 16.0kg / 0.066sec/60°
Torque / Speed @ 7.4V: 19.0kg / 0.056sec/60°
Torque / Speed @ 8.4V: 23.0kg / 0.050sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6
Waterproof Rating: IP65 water-resistant
Bearing: Metal ball bearings (2)
Size: 40*20*37.5 mm
Weight: 80,5 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
Not sure if these specifications are right for you? Here is an overview with even more information on all TEAM SPEC. SERVOS to compare:

O conteúdo Servo HV Digital Full-Alu ST23DBF 23KG Team-Spec. aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/servo-hv-digital-full-alu-st23dbf-23kg-team-spec/feed/ 0 Servo HV Digital Alu LP15DBF 15KG 8.4V Race-Spec. https://rc4all.pt/produto/servo-hv-digital-alu-lp15dbf-15kg-8-4v-race-spec/ https://rc4all.pt/produto/servo-hv-digital-alu-lp15dbf-15kg-8-4v-race-spec/#respond Tue, 06 Feb 2024 17:34:44 +0000 https://rc4all.pt/?post_type=product&p=29826 Servo HV Digital Alu LP15DBF 15KG 8.4V Race-Spec. Servo HV Digital Alu LP15DBF 15KG 8.4V Race-Spec. 2030106 Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, […]

O conteúdo Servo HV Digital Alu LP15DBF 15KG 8.4V Race-Spec. aparece primeiro em Site rc4all.

]]> Servo HV Digital Alu LP15DBF 15KG 8.4V Race-Spec.

Servo HV Digital Alu LP15DBF 15KG 8.4V Race-Spec.
2030106

servo-pics-1.jpg
2030106_02.jpg
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.

Fields of application for our “Race Spec. Servos” is the competition, but also for ambitious “club racers” and hobby drivers these servos are fantastic!
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Speed / Low Profile2030110_01400.jpg
Operating Voltage: 4.8 – 8.4V HV
Torque / Speed @ 4.8V: 9.0kg / 0.082sec/60°
Torque / Speed @ 6.0V: 12.0kg / 0.073sec/60°
Torque / Speed @ 7.4V: 13.0kg / 0.065sec/60°
Torque / Speed @ 8.4V: 15.0kg / 0.060sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6 – CNC machined with plastic inlay
Waterproof Rating: IP65 water-resistant
Bearing: Metal ball bearings (2)
Size: 40.8*20.2*27.2 mm
Weight: 54,2 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
raceservoopenkopie.jpg
Not sure if these specifications are right for you? Here is an overview with even more information on all RACE SPEC. SERVOS to compare:
race-servos-specs-1.jpg
race-servos-specs-2.jpg
20301xx-servo-gruppe.jpg

O conteúdo Servo HV Digital Alu LP15DBF 15KG 8.4V Race-Spec. aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/servo-hv-digital-alu-lp15dbf-15kg-8-4v-race-spec/feed/ 0 Servo HV Digital Full-Alu ST50DBF 50KG Team-Spec. https://rc4all.pt/produto/servo-hv-digital-full-alu-st50dbf-50kg-team-spec/ https://rc4all.pt/produto/servo-hv-digital-full-alu-st50dbf-50kg-team-spec/#respond Tue, 06 Feb 2024 17:29:44 +0000 https://rc4all.pt/?post_type=product&p=29822 Servo HV Digital Full-Alu ST50DBF 50KG Team-Spec. Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle […]

O conteúdo Servo HV Digital Full-Alu ST50DBF 50KG Team-Spec. aparece primeiro em Site rc4all.

]]> Servo HV Digital Full-Alu ST50DBF 50KG Team-Spec.
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.

Our “Team Spec.” servos are mainly used in competition vehicles and offer a whole range of excellent features:
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Torque
Operating Voltage: 4.8 – 8.4V HV
Torque / Speed @ 4.8V: 30.0kg / 0.175sec/60°
Torque / Speed @ 6.0V: 37.0kg / 0.145sec/60°
Torque / Speed @ 7.4V: 44.0kg / 0.130sec/60°
Torque / Speed @ 8.4V: 50.0kg / 0.115sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6
Waterproof Rating: IP65 water-resistant
Bearing: Metal ball bearings (2)
Size: 40*20*37.5 mm
Weight: 80,5 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
Not sure if these specifications are right for you? Here is an overview with even more information on all TEAM SPEC. SERVOS to compare:

O conteúdo Servo HV Digital Full-Alu ST50DBF 50KG Team-Spec. aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/servo-hv-digital-full-alu-st50dbf-50kg-team-spec/feed/ 0 Servo HV Digital Alu ST18DBF 18KG 8.4V Race-Spec. https://rc4all.pt/produto/servo-hv-digital-alu-st18dbf-18kg-8-4v-race-spec/ https://rc4all.pt/produto/servo-hv-digital-alu-st18dbf-18kg-8-4v-race-spec/#respond Tue, 06 Feb 2024 17:19:04 +0000 https://rc4all.pt/?post_type=product&p=29818 Servo HV Digital Alu ST18DBF 18KG 8.4V Race-Spec. Servo HV Digital Alu ST18DBF 18KG 8.4V Race-Spec. 2030104 Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, […]

O conteúdo Servo HV Digital Alu ST18DBF 18KG 8.4V Race-Spec. aparece primeiro em Site rc4all.

]]> Servo HV Digital Alu ST18DBF 18KG 8.4V Race-Spec.

Servo HV Digital Alu ST18DBF 18KG 8.4V Race-Spec.
2030104

servo-pics-1.jpg
2030104_02.jpg
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.

Fields of application for our “Race Spec. Servos” is the competition, but also for ambitious “club racers” and hobby drivers these servos are fantastic!
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Speed2030110_01400.jpg
Operating Voltage: 4.8 – 8.4V HV
Torque / Speed @ 4.8V: 14.0kg / 0.080sec/60°
Torque / Speed @ 6.0V: 15.0kg / 0.072sec/60°
Torque / Speed @ 7.4V: 16.5kg / 0.065sec/60°
Torque / Speed @ 8.4V: 17.5kg / 0.058sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6 – CNC machined with plastic inlay
Waterproof Rating: IP65 water-resistant
Bearing: Metal ball bearings (2)
Size: 40*20*37.5 mm
Weight: 73,0 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
raceservoopenkopie.jpg
Not sure if these specifications are right for you? Here is an overview with even more information on all RACE SPEC. SERVOS to compare:
race-servos-specs-1.jpg
race-servos-specs-2.jpg
20301xx-servo-gruppe.jpg

O conteúdo Servo HV Digital Alu ST18DBF 18KG 8.4V Race-Spec. aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/servo-hv-digital-alu-st18dbf-18kg-8-4v-race-spec/feed/ 0 Servo HV Digital Alu LP19DBT 19KG 8.4V Race-Spec. https://rc4all.pt/produto/servo-hv-digital-alu-lp19dbt-19kg-8-4v-race-spec/ https://rc4all.pt/produto/servo-hv-digital-alu-lp19dbt-19kg-8-4v-race-spec/#respond Tue, 06 Feb 2024 17:14:22 +0000 https://rc4all.pt/?post_type=product&p=29814 Servo HV Digital Alu LP19DBT 19KG 8.4V Race-Spec. Servo HV Digital Alu LP19DBT 19KG 8.4V Race-Spec. 2030107 Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, […]

O conteúdo Servo HV Digital Alu LP19DBT 19KG 8.4V Race-Spec. aparece primeiro em Site rc4all.

]]> Servo HV Digital Alu LP19DBT 19KG 8.4V Race-Spec.

Servo HV Digital Alu LP19DBT 19KG 8.4V Race-Spec.
2030107

servo-pics-1.jpg
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.

Fields of application for our “Race Spec. Servos” is the competition, but also for ambitious “club racers” and hobby drivers these servos are fantastic!
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Speed / Low Profile2030110_01400.jpg
Operating Voltage: 4.8 – 8.4V HV
Torque / Speed @ 4.8V: 13.0kg / 0.105sec/60°
Torque / Speed @ 6.0V: 16.0kg / 0.090sec/60°
Torque / Speed @ 7.4V: 18.0kg / 0.080sec/60°
Torque / Speed @ 8.4V: 19.0kg / 0.070sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6 – CNC machined with plastic inlay
Waterproof Rating: IP65 water-resistant
Bearing: Metal ball bearings (2)
Size: 40.8*20.2*27.2 mm
Weight: 54,2 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
raceservoopenkopie.jpg
Not sure if these specifications are right for you? Here is an overview with even more information on all RACE SPEC. SERVOS to compare:
race-servos-specs-1.jpg
race-servos-specs-2.jpg
20301xx-servo-gruppe.jpg

O conteúdo Servo HV Digital Alu LP19DBT 19KG 8.4V Race-Spec. aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/servo-hv-digital-alu-lp19dbt-19kg-8-4v-race-spec/feed/ 0 Servo Digital Alu HV 3S/4S ST62DBFT Crawler-Spec. Waterproof https://rc4all.pt/produto/servo-digital-alu-hv-3s-4s-st62dbft-crawler-spec-waterproof/ https://rc4all.pt/produto/servo-digital-alu-hv-3s-4s-st62dbft-crawler-spec-waterproof/#respond Tue, 06 Feb 2024 17:03:58 +0000 https://rc4all.pt/?post_type=product&p=29809 Servo Digital Alu HV 3S/4S ST62DBFT Crawler-Spec. Waterproof Servo Digital Alu HV 3S/4S ST62DBFT Crawler-Spec. Waterproof 2030109 Servos are part of the “RC system” and thus the basis of a remote-controlled model. Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, […]

O conteúdo Servo Digital Alu HV 3S/4S ST62DBFT Crawler-Spec. Waterproof aparece primeiro em Site rc4all.

]]> Servo Digital Alu HV 3S/4S ST62DBFT Crawler-Spec. Waterproof

Servo Digital Alu HV 3S/4S ST62DBFT Crawler-Spec. Waterproof
2030109

servo-pics-1.jpg
2030109_02.jpg
Servos are part of the “RC system” and thus the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.

This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions.

Our “Crawler Spec. Servos” are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle.
TECHNICAL DATA HIGHLIGHTS:
Servo Category: High-Torque & High Speed2030110_01400.jpg
Operating Voltage: 7.4 – 16.8V HV
Torque / Speed @ 12V: 48.0kg / 0.120sec/60°
Torque / Speed @ 14.4V: 54.0kg / 0.100sec/60°
Torque / Speed @ 16V: 60.0kg / 0.095sec/60°
Torque / Speed @ 16.8V: 62.0kg / 0.090sec/60°

Technology: Digital

Motor Type: Brushless
Gear Material: Reinforced steel
Housing Material: AL6061 T6
Waterproof Rating: IP67 water-proof
Bearing: Metal ball bearings (2)
Servo Arms: 1* Aluminum, 2* Plastic
Size: 40*20*41.5 mm (Standard)
Weight: 88,2 g
Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary!
 
crawlerservoopen400.jpg2030109_400.jpg
Not sure if these specifications are right for you? Here is an overview with even more information on all CRAWLER SPEC. SERVOS to compare:
crawlerservospecs.jpg
20301xx-servo-gruppe.jpg

O conteúdo Servo Digital Alu HV 3S/4S ST62DBFT Crawler-Spec. Waterproof aparece primeiro em Site rc4all.

]]> https://rc4all.pt/produto/servo-digital-alu-hv-3s-4s-st62dbft-crawler-spec-waterproof/feed/ 0